Difference between revisions of "Fab modules - compiled version"
From Fab Lab Wiki - by NMÍ Kvikan
(New page: This is how I installed the Fab Modules on Ubuntu and it seems to work. I got this tutorial on *[http://wiki.infosyncratic.nl/FabLab http://wiki.infosyncratic.nl/FabLab] *fab modules cd...) |
|||
Line 21: | Line 21: | ||
and press enter | and press enter | ||
+ | |||
+ | ==CAMM settings== | ||
+ | |||
+ | To make it work with the vinyl cutter: | ||
+ | First find out how the vinyl-cutter is connected, (what is the name of the usb port?) | ||
+ | cd .. | ||
+ | cd .. | ||
+ | cd .. | ||
+ | Until you are on the root | ||
+ | then write | ||
+ | /var/log$ dmesg | ||
+ | Turn on the vinyl cutter and | ||
+ | /var/log$ dmesg | ||
+ | Then you will see the name of the USB port that the vinyl cutter uses | ||
+ | |||
+ | Then you should change the permisson | ||
+ | |||
+ | /dev$ sudo chmod 0766 /dev/usblp0 | ||
+ | |||
+ | Open the send_camm | ||
+ | sudo gedit send_camm | ||
+ | Change the name of the port to the one you will be using | ||
+ | /dev/usblp0 |
Revision as of 11:46, 23 February 2011
This is how I installed the Fab Modules on Ubuntu and it seems to work. I got this tutorial on
- fab modules
cd ~/Desktop mkdir fabmodules cd fabmodules wget http://kokompe.cba.mit.edu/dist/fab.zip unzip fab.zip chmod +x bin/* sudo mv bin/* /usr/local/bin
- graphing and interface modules
apt-get -y install python-wxtools
And to run the Fab module simply write:
fab
and press enter
CAMM settings
To make it work with the vinyl cutter: First find out how the vinyl-cutter is connected, (what is the name of the usb port?)
cd .. cd .. cd ..
Until you are on the root then write
/var/log$ dmesg
Turn on the vinyl cutter and
/var/log$ dmesg
Then you will see the name of the USB port that the vinyl cutter uses
Then you should change the permisson
/dev$ sudo chmod 0766 /dev/usblp0
Open the send_camm
sudo gedit send_camm
Change the name of the port to the one you will be using
/dev/usblp0