Difference between revisions of "How to Make Circuits in the Fab Lab"
(→Troubleshooting) |
(→Troubleshooting) |
||
| Line 87: | Line 87: | ||
avrdude: initialization failed, rc=-1 | avrdude: initialization failed, rc=-1 | ||
Double check connections and try again, or use -F to override this check. | Double check connections and try again, or use -F to override this check. | ||
| − | | Follow the [[Make a programming cable]] tutorial to build a cable | + | | |
| + | *Follow the [[Make a programming cable]] tutorial to build a cable | ||
| + | *Check for electrical continuity at the cables end | ||
|- | |- | ||
| Microcontroller voltage terminals | | Microcontroller voltage terminals | ||
| Line 100: | Line 102: | ||
**Follow the [[Make a programming cable]] tutorial to build a cable; | **Follow the [[Make a programming cable]] tutorial to build a cable; | ||
**If the cable is done right, make sure the wires are making connection on the cable connectors, by using the multimeter; | **If the cable is done right, make sure the wires are making connection on the cable connectors, by using the multimeter; | ||
| + | avrdude tiny45 load hex file, bsd cable: avrdude -p t45 -c bsd -U flash:w:file.hex | ||
= External Links = | = External Links = | ||
* asdf | * asdf | ||
Revision as of 18:38, 15 January 2010
Making a circuit requires several mini-projects:
Contents
Design and Architecture
Decide what function your circuit board should have
A good approach is to write down in words how the circuit board should work.
- download a cad file from the hello-world circuits section on the http://fab.cba.mit.edu/about/fab/ or from hello world electronics
- Look for open hardware solutions on the internet.
- Or design custom circuit
Create the schematic and board layout in a CAD program
Use e.g. Eagle or Cad.py, ,or Gimp (drawing tool), Inkscape or Open Office or draw it with black pen and scan and trace. The gap should be the right size and shape.
Physical Fabrication
Machine the board
Physically milling or cutting out the board which connects components
- Making circuit boards on Modela
- Making circuit boards on Camm with e.g. copper foil.
- Making circuit boards on Epilog Laser
"Stuffing": Solder components on to the board
Solder the components to the board. If you want to where the components should be you could look at the file design, in .cad file or you can check out
- Soldering -> Gisli
- Good Vs. Bad Soldering
- Circuit descriptons. pdf
- Scotts new Hello World Circuits description
Microcontroller Programming
Make a programming cable
- Make a programming cable -> Pedro
Write the Program
Write the program (in e.g. assembler or C) , compile the program so that the microcontroller will understand it -> Jan
Programming the microcontroller
If you are using the Fab Labs, AVR microcontrollers
- Use ICP (In Circuit Programmer)
- AVRDUDE
-> Jan
Testing and Troubleshooting
Test the microcontroller
Plug the microcontroller in.
- Is the power on?
Troubleshooting
If your board is not working, follow the step to troubleshoot it:
- Check if the power is on:
| Check | Problem | Possible solution |
|---|---|---|
| Battery voltage | Voltage too low | Replace the battery |
| Microcontroller voltage terminals | No voltage or too low (it should be around 3,3 V to 5 V for the hello boards) |
|
If you cannot download your code to the microcontroller,
| Check | Problem | Possible solution |
|---|---|---|
| If the cable is done right | Software AVRDUDE gives error:
avrdude:AVR device not responding;
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override this check.
|
|
| Microcontroller voltage terminals | No voltage or too low (it should be around 3,3 V to 5 V for the hello boards) |
|
- Check if your cable is done right:
- Follow the Make a programming cable tutorial to build a cable;
- If the cable is done right, make sure the wires are making connection on the cable connectors, by using the multimeter;
avrdude tiny45 load hex file, bsd cable: avrdude -p t45 -c bsd -U flash:w:file.hex
External Links
- asdf
