Difference between revisions of "Liquid mold making"

From Fab Lab Wiki - by NMÍ Kvikan
Jump to: navigation, search
(New page: '''Liquid wax mold making.''' '''Procedure for making simple molds''' #Melt the Flexwax in a double boiler.When it is comepletely liquid,allow it to col to a working temperaure of 1...)
 
Line 3: Line 3:
  
  
#Melt the Flexwax in a double boiler.When it is comepletely liquid,allow it to col to a working temperaure of 125°F(52°).
+
#Melt the Flexwax in a double boiler.When it is comepletely liquid, allow it to cool to a working temperaure of 52 °C.
 
#Apply vaseline sparingly overt the surface of the object for easy release.
 
#Apply vaseline sparingly overt the surface of the object for easy release.
 
#Brush liquid Flexwax over the surface carefully.
 
#Brush liquid Flexwax over the surface carefully.

Revision as of 14:43, 6 July 2009

Liquid wax mold making. Procedure for making simple molds


  1. Melt the Flexwax in a double boiler.When it is comepletely liquid, allow it to cool to a working temperaure of 52 °C.
  2. Apply vaseline sparingly overt the surface of the object for easy release.
  3. Brush liquid Flexwax over the surface carefully.
  4. After the intire area is coated, lay on pieces of net reinforcing material such as cheesecloth.
  5. Bruch second coat of Flexwax over the netting to the necessary thickness and allow it to cool.
  6. For larger pieces, make a saddle mold using plaster bondage.
  7. Remove the mold carefully and chill it by placeing it in a tub of cold water.
  8. Cast plaster, polyester or most any other material in the usual manner.
  9. After casting, the mold may be melted and reused.