Difference between revisions of "User:Sandip pune/Moulding"

From Fab Lab Wiki - by NMÍ Kvikan
Jump to: navigation, search
(New page: How to make Rubber mould Prerequisite Mould made from wax, soft wax, wood, or hard clay. In this process we used wax mould milled on MODELLA Image1 '''GENERAL INSTRUCTIONS AND CARE ...)
 
Line 2: Line 2:
 
Prerequisite  
 
Prerequisite  
 
Mould made from wax, soft wax, wood, or hard clay.
 
Mould made from wax, soft wax, wood, or hard clay.
In this process we used wax mould milled on MODELLA [[Image1]]
+
In this process we used wax mould milled on MODELLA [[Image:IMG 0677.JPG]]
 
   
 
   
 
'''GENERAL INSTRUCTIONS AND CARE TO TAKE'''
 
'''GENERAL INSTRUCTIONS AND CARE TO TAKE'''

Revision as of 13:12, 22 January 2010

How to make Rubber mould Prerequisite Mould made from wax, soft wax, wood, or hard clay. In this process we used wax mould milled on MODELLA IMG 0677.JPG

GENERAL INSTRUCTIONS AND CARE TO TAKE

  1. make sure that your mold is milled completely and it appears as per design.
  2. make sure that mold have sufficient space to accommodate liquid rubber compound.
  3. Mold should not leak liquid rubber compound.
  4. There should be enough space above milled mold/impression so that liquid rubber compound raise sufficiently to strengthen and accommodate full impression
  5. Use disposable nitrile hand gloves while handling liquid rubber compound and casting powder

Step1

  1. Use liquid rubber compound containing one bottle of Urethane mold compound and Rubber mold compound