File:3D-printing-example-3.JPG

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Panasonic
Camera model	DMC-TZ30
Exposure time	1/60 sec (0.016666666666667)
F Number	f/3.3
ISO speed rating	125
Date and time of data generation	17:58, 13 May 2014
Lens focal length	4.3 mm
Width	3,240 px
Height	4,320 px
Bits per component	8 8 8
Pixel composition	RGB
Orientation	Normal
Number of components	3
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	Adobe Photoshop CS6 (Windows)
File change date and time	13:21, 16 August 2014
Y and C positioning	Co-sited
Exposure Program	Normal program
Exif version	2.3
Date and time of digitizing	17:58, 13 May 2014
Meaning of each component	Y Cb Cr does not exist
Image compression mode	4
APEX shutter speed	5.906891
APEX aperture	3.444932
APEX exposure bias	0
Maximum land aperture	3.4453125 APEX (f/3.3)
Metering mode	Pattern
Light source	Unknown
Flash	Flash did not fire, compulsory flash suppression
Supported Flashpix version	0,100
Color space	sRGB
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	0
Focal length in 35 mm film	24 mm
Scene capture type	Standard
Scene control	Low gain up
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Date metadata was last modified	13:21, 16 August 2014
Unique ID of original document	07A7182D3E5C8AECD79B0A715DF26C4F
IIM version	54,440