User:JohannaMaria/my-nametag

From Fab Lab Wiki - by NMÍ Kvikan
Jump to: navigation, search

My nametag

My first project was to make a nametag for myself by using the Inkscape. I had never used it before, but I slowly got the hang of it. I used the Fablab logo and some forest image for my design.

At first I wanted to see how the nametag would turn out if the text and figures were all cut of.

Nametag1..jpg


For the second nametag test I combined vector and raster at 300dpi. I preferred this look and started to do some more testing with the dpi level.

Nametag2..jpg


Testing the raster 300dpi, 400dpi and 600dpi.

Nametag raster testing..jpg


For the final nametag I did the rastering twice. At first with 300dpi and then again with 200dpi for the result that I thougt looked good. I Also added some inlay do the logo.

Final nametag..jpg


Tutorial: How to do an Inlay in Inkscape

https://www.youtube.com/watch?v=NDVHwlVAl_g&feature=youtu.be