Revision as of 17:59, 11 October 2016 by Tankzter(talk | contribs)(Created page with "== Project: Fablab Card == 300px|left 1.st project was the Fablab card, it was a combination of working with Inkscape, laser-cutting and press-fitting...")
1.st project was the Fablab card, it was a combination of working with Inkscape, laser-cutting and press-fitting.
to be able to work with the Inkscape program is very useful when creating two dimensional objects.
The main purpose of this project was to getting back to working with Inkscape and laser-cutter and acknowledging that the laser cutter cuts away approx 1 mm of the material. that´s how the press fitting works by cutting away an precise amount of material.
