User:Frosti/3dscanning

3D scanning with Next Engine

Setup Controls

Scan

• Enter the Scan Panel by clicking the Scan button
• 360:
  • - Select the "360" scan option in the scan panel to scan the object from every angle.
  • - The number of divisions will control the degree of rotation between scans and the total number of

scans

• • - The individual scans will be grouped as a family.

I had a thing that was about 250 mm height, so I chose

• Wide = 0.015" accuracy, 10x13" field of view
  • - Place object 17 inches from the front of the scanner

Align

• Click on Align
• Alignment for 360
  • - Place 1 pin on a common location between 2 scans within the family.
  • - Drag the pin to the location or double click on the point to place the pin.