Eagle
See version in Icelandic eagle kennsluefni
Download and install Eagle
Designing circuits with Eagle
Open Eagle
- Select New Project
- Select New Schematic
Open library
- Open library, click Use
- Download from the internet a library or select on in the computer the library that we will be using (e.g. NG.lbr[1] or the one from Sparkfun.lbr ([2] version 2011 ( right click on this link, save link as)
- SelectAdd, then you can open the library
- (if you don't find your thing you could also click on "Use")
- Open NG.lib library for Fab Lab projects.
Tour for the Eagle on CadSoft site
- Select the things you want to use and click Add to get the components.
- You can select different view by clicking on Board
- You can select object by rightclicking them and selecting packning
- Connect objecs by clicking Wire and make wire between objects.
- It can be good to make connections and get a sign for Ground and put where it should be GND.
- View Grid select the size of the grid, it should be around (0,025 inches)
- Move to move object or line.
- Delete to remove object or line and so on.
- Junction Connection point .
- You can right click objects and select value to put
- hægt að hægri smella á hluti og velja value til að setja inn gildi s.s. fyrir þétta.
- hægri smella og velja properties til að endurnefna.
- Til að athuga hvort hlutur sé rétt tengdur er gott að prófa að hreyfa hlutinn.
- ERC Error correction villuleit.
Raða hlutum upp
Add
- Frame til að setja ramma utan um teikninguna.
- raða hlutum
- smella á Auto
- Velja Bottom N/A
Ef þetta raðast ekki rétt hægt að velja línur með þvi hægri smella og velja rip off
- TX transmit
- DTR data terminal ready
- Rx Recieve
- Miso -master in slave out
- Mosi master out slave in
- sck system clock
- MOSI (3) GND (2) MISO (1) |
- -RESET (4) SCK (5)
Project 1
- Download libraries
- NG.lbr[3]
- the one from Sparkfun.lbr ([4] version 2011 ( right click on this link, save link as)
- Attiny 44 library